SKU: 3095026 ×1
Water Cooled Radiator Cooling Fan Kit for In-line 4-Stroke Gasoline Engine
Features:
.This cooling kit includes water tank, fan, water cooling tube, etc.,
.Suitable for inline four stroke cylinder water cooled gasoline engine model
.The use of the water-cooled heat dissipation kit enables the engine to have good heat dissipation efficiency in operation
.Modified water cooling has the characteristics of better heat dissipation, higher compression ratio. Compared with the same displacement of the air-cooled engine, more power, more fuel saving, and reducing the temperature faster. Extend the working time and service life of the engine
.Exercise your hands-on ability
.Warm Tips: Due to DIY modification accessories, it must be operated with some hand-on ability.
.For over 14 years old
Specifications:
.Color: As Shown
.Material: Metal + Plastic
.Fan Size: 9.5 x 9.5 x 2.5cm
.Radiator Size: 13.3 x 10 x 3.1cm
.Package Dimensions: 13.3 x 10 x 5.6cm
.Product Weight: 250g
.Package Dimensions: 25 x 25 x 15cm
.Package Weight: 280g
.Packing: Bag
Package Content:
.1 x Water Cooled Cooling Kit
--------------------------------------------------------------------
SKU: 3228799 ×1
12V-24V 80A Brushless ESC for In-line Four-cylinder Gasoline Engine Model
Features:
.High-quality 80A brushless ESC, suitable for straight four gasoline engines.
.It can also be widely used in various model engines, model airplanes, fans, oil pumps, etc.
.It can be used with a speed regulator, and can be used with a brushless motor and power supply.
.Wiring Mode: One end of the ESC is connected to the starter motor, and the other end is connected to the battery and speed regulator.
Specifications:
.Color: As Shown
.Material: Electronic Components + Plastic
.ESC: 80A
.Power Supply Voltage: 7-24V
Maximum Current: >80A
Recommended Voltage: DC voltage 12V-24V (the positive and negative poles cannot be reversed)
.Socket: Welded 3.5mm banana head
.Product Weight: 81g
.Package Dimensions: 19 x 7 x 2cm
.Package Weight: 81g
.Packing: Bag
Package Content:
.1 x ESC
--------------------------------------------------------------------
SKU: 3228800 ×1
Consistency Speed Controler Servo Tester for In-line Four-cylinder Gasoline Engine Model
Features:
.It can easily detect and set the virtual position, jitter and neutral position of the server.
.Two sets of servos or ESCs can be connected
.Single-chip microcomputer control, good stability and high precision.
.Rotate the knob to detect the steering gear.
.If you connect an electronic speed controller (brushed or brushless), you can get rid of the remote control device and adjust the speed manually. It is used to test the performance of the speed controller or motor. It is very practical, and there is no need to connect the remote control and the receiver.
.It is equivalent to the function of a "manual receiver", which simulates the rudder of the transmitter through the knob.
.Note: This product cannot test the servos above 55g, but the ones below 55g can be tested.
Specifications:
.Color: As Shown
.Material: Electronic Components + Plastic
.Output: ≤15mA (5.0)
.Input: DC 4.5-6.0v
.Output Signal: 1.5ms±0.5ms
.Adjustment Mode: Manual, automatic, neutral
.Product Dimensions: 4.25 x 2.4 x 2.35cm
.Product Weight: 7.5g
.Package Dimensions: 11.5 x 7 x 3cm
.Package Weight: 7.5g
.Packing: Bag
Package Content:
.1 x Servo Tester
--------------------------------------------------------------------
SKU: 3378538 ×1
75ML Miniature Plastic Fuel Tank for TOYAN FS-V800 Engine Model
Specifications:
.Material: Plastic
.Product Weight: 30g
.Package Dimensions: 10 x 6 x 5cm
.Package Weight: 40g
.Packing: Bag
--------------------------------------------------------------------
SKU: 3378539 ×1
Oil Pipe for TOYAN FS-V800 Engine Model
Features:
.The oil pipe has an inner diameter of 3mm and an outer diameter of 3.5mm.
Specifications:
.Material: Silica Gel
.Inner Diameter: 3mm
.Outer Diameter: 5mm
.Length: 50cm
.Product Weight: 10g
.Package Dimensions: 8 x 5 x 4cm
.Package Weight: 15g
.Packing: Bag
--------------------------------------------------------------------
SKU: 3439997 ×2
CDI High Pressure Pulse Igniter with Two Fire Head Caps for Gasoline Engine Model
Features:
.The CDI igniter adopts high-quality electronic components and manual weld lines for stable ignition, excellent performance and longevity, which is used for various single-cylinder gasoline engine models and distributor-type multi-cylinder gasoline engine models.
.Notes: You need to prepare the battery power supply with a JST plug and connect the engine ignition line by yourself. Please feel free to contact us if you have any questions.
Specifications:
.Material: ABS + Electronic Components
.Type: High Pressure Pulse Igniter
.Input Voltage: 6V-12V
.Output Voltage: 15KV-20KV
.Frequency: 0-15000r/min
.Plug Type: JST Plug
.Product Dimensions: 5.4 x 4.3 x 2.6cm
.Product Weight: 50g
.Package Dimensions: 10 x 8 x 4cm
.Package Weight: 70g
.Packing: Bag
.Ages: 14+
--------------------------------------------------------------------
